How to use Hitool in EV44B0

Program MBL(Micetek Boot Loader) to EV44B0-II board.
 1)  Open "Hitool for ARM" or "Hitool for UClinux"'s "Startup Configuration",
     select "Maker" to Samsung.
     select "Target CPU" to ARM7TDMI-S3c44b0x.
     select "Protocol" tp PowerProbe.
     select "Endian" to little Endian.
     set the "Port" and "Address" depending on your system.
     select the EV44B0II.INC(on root directory), as initial file.
     click "ok", to exit.
 2)  lanuch the "Hitool for ARM" or "Hitool for UClinux"
     open the "flash programming ..." on "Tools" menu.
     Select the "File' to EV44B0_MBL_v1.0.2.bin(on root\bin directory).
     set "Flash information" as following:
         "Maker" to universal    "Device" to universal
         "Port Size" to 16bits   "Chip count" to 1
         "Flash start" to 0      "Flash size" to 0x200000
     set "RAM Usage" as following:
         "Range" to 0x0c000000    "to" to 0x0c004000
     set "Flash Offset" to 0
     set "Timeout" to 50
     Then click Erase button. When Erase ok, click Flash button. After burn ok,
     reset the board.